Insulation Company in Burbank, CA
Alden Attic Insulation handles attic insulation, blown-in insulation, and insulation removal for homeowners across Burbank, CA. Most Burbank homes were built between the 1930s and 1970s, which means many attics are under-insulated by today’s R-value standards and some still carry original material that has settled or degraded. We give you a written price before any work starts, and every job is backed by our 365-Day Done Right Promise in writing. Call (254) 272-5876 for a free estimate.
Why Burbank Homes Are Different
Burbank sits in the eastern San Fernando Valley, where summer temperatures routinely climb past 90°F and winter nights dip into the low 40s. That swing puts real strain on attic insulation. Homes in the hillside neighborhoods above Glenoaks Boulevard, like Burbank Hills and the streets climbing toward DeBell, deal with steeper rooflines and tighter access than the flat-lot ranch homes down near Magnolia Park. Those older ranches, many built between 1940 and 1960, often have original batt insulation that has compressed to half its rated R-value. We also work in the Chandler Bikeway corridor and the equestrian-zoned streets in the Rancho area, where homes tend to sit on larger lots with attic access through narrow interior hallways. Burbank’s building code follows California Title 24 energy standards, and the city’s permit office does review insulation changes when they’re part of a larger remodel, but a straightforward attic insulation or removal job typically moves forward without a permit. What matters more is matching the material to the home’s era and ventilation setup, because a sealed-up 1950s attic traps heat differently than a 1980s addition.
Our Main Burbank Services
These are the three jobs Burbank homeowners call us about most. Each has its own dedicated page with detailed pricing and what to expect from start to finish.
Attic Insulation in Burbank
Attic insulation is the workhorse upgrade for Burbank homes. We inspect the existing R-value, check for air leaks around recessed lighting and plumbing penetrations, and recommend whether batts or blown-in material fits the space better. Older Burbank ranch homes often need air sealing before new insulation goes in, because gaps around ceiling fixtures let conditioned air escape all year. We work with Johns Manville and CertainTeed materials, and every job gets a written price and a 365-day written guarantee. See the full breakdown on our Attic Insulation in Burbank page.
Blown In Insulation in Burbank
Blown-in insulation is a common choice for Burbank attics with irregular joist spacing or low-clearance access, which we see frequently in hillside homes where roof pitches make batt installation awkward. It settles into corners and around ductwork better than rigid batts. For Burbank’s hot summers, blown-in fiberglass or cellulose helps keep ceiling temperatures stable, which matters when your central air runs for months. We install Knauf and GreenFiber blown-in products, and the written quote covers everything before a single tool comes off the truck. Learn more on our Blown In Insulation in Burbank page.
Insulation Removal in Burbank
Removal is the starting point when insulation is water-damaged, pest-soiled, or too old to do its job. Many Burbank homes built before 1970 still have original material that has broken down, and in some cases we’re removing insulation installed decades ago that never met modern R-value targets. Our crew removes the old material, prepares the attic space, and disposes of everything properly. We use Rockwool and CertainTeed products when new insulation goes back in. Get the details on our Insulation Removal in Burbank page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burbank
We install and remove insulation using products from Johns Manville, Knauf, Rockwool, and CertainTeed, among others. These brands are stocked in our Los Angeles supply chain, so most Burbank jobs start within a few days of your estimate. You can research every material before committing. See our brands for the full list.
Pricing for Insulation Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Attic insulation – full replacement (1,200 sq ft attic) | $1,800 – $2,600 |
| Attic insulation – top-up over existing material | $900 – $1,500 |
| Air sealing + attic insulation package | $2,200 – $3,400 |
| Blown-in insulation – 1,200 sq ft attic to R-38 | $1,600 – $2,400 |
| Blown-in insulation – 800 sq ft attic to R-30 | $1,100 – $1,700 |
| Insulation removal – standard attic, no contamination | $1,000 – $1,800 |
| Insulation removal – rodent or water-damaged attic | $1,400 – $2,600 |
| Insulation removal + new blown-in replacement | $2,400 – $4,200 |
Hillside access, narrow attic openings, and heavy contamination push Burbank jobs toward the upper end of these ranges. Whatever the number, it’s in your hand in writing before work begins, and it’s the same number on the invoice.
Neighborhoods We Serve in Burbank
We work throughout Burbank, from the flats to the hills. Our typical arrival window is within two hours of the scheduled time, and we call if anything changes.
- Magnolia Park
- Burbank Hills
- Rancho Equestrian District
- Chandler Bikeway corridor
- Northwest Burbank
Service Area – Cities Near Burbank
Beyond Burbank, our crews serve several nearby communities. Homeowners in Glendale, CA and West Hollywood, CA call us for the same written-price, written-guarantee standard. We also cover Altadena, CA to the east and Beverly Hills, CA to the southwest.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Burbank
Most Burbank estimates are scheduled within 48 hours, and installation typically starts within three to five business days after you approve the written quote. Dispatch and scheduling are coordinated from our Los Angeles office, with crews serving Burbank locally. Call (254) 272-5876 and a live person answers 24/7.
For standalone insulation replacement or removal, Burbank does not require a permit in most residential cases. If the insulation is part of a larger remodel with structural changes, the permit process would fall under that project’s scope, not the insulation itself. We can tell you what applies once we see the attic.
Yes. We serve every Burbank neighborhood, including the hillside streets and the flat-lot areas, with no trip charge for the estimate. The written quote you approve is the price you pay, backed by our 365-Day Done Right Promise in writing.
Call (254) 272-5876 for a free estimate. A live person answers, day or night, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Burbank Customers Say
"Spray foam in the rim joist. Floors above are warmer."
- Iris L."Tidy crew. Vacuumed the hall and covered the hatch."
- Bea J."Clear estimate with R-value listed. No hidden extras."
- Hank T.